When bobbin is full, To wind the bobbin—machine 404 – SINGER 404K User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
• Loosen stop motion screw.
•
Place
empty
bobbin
on
spindle.
•
Press
bobbin
winder
down
against hand wheel.
•
Place
spool
of
thread
on
spool pin.
•
Thread between tension discs
and through bobbin as shown
in Fig. 11.
•
Hold end of thread and start
machine. (End of thread will
break off after a few coils have
been wound on bobbin).
When Bobbin is Full
• Stop machine.
•
Lift
bobbin
winder
away
from hand wheel and remove
bobbin.
• Tighten stop motion screw.
F
ig
.
ij
.
To Wind the Bobbin—Machine 404.
To Wind the Bobbin—Machines 328K and 329K.
"""""""".
F
ig
. ]2.
•
Loosen stop motion
screw.
•
Place
bobbin
on
spindle.
•
Pull
out
bobbin
winder
engaging
slide
as
shown
in
Fig. 12.
•
Place spool of thread
on
spool
pin
and
thread
machine
as
shown in Fig. 13.