SINGER W1065 User Manual

Page 9

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

THREADING THE BOBBIN CASE

Step 1 i illustrated in Fig. 7 i. Hold bobbin

case between thumb and forefinger of left hand,

so that the slot m the edge of the bobbin case

IS on top. Take the bobbin between thumb and

forefinger of right hand so that the thread on

top

leads

from

left

right.

Step

Insert

bobbin into bobbin case, pull the thread into the

slot of the bobbin case as shown in Fig. 8, and

draw it under the tension spring and into the fork

shaped opening of the spring as shown in Fig. 9.

Fig. 6

Fig. 7

Fig. 8

Fig. 9