SINGER W1065 - Manual (Page 39)

41
Trouble i Probable Cause Correction
Upper Thread
Breaking Improperly threaded
Refer to threading instructions see page No. 8
and rethread machine
Too much tension
Loosen tension on upper thread by turning
thread tension knob to lower number
Starting with take-up
i in incorrect position
Always start sewing with take-up lever in
highest position
Improper setting of
needle
Refer to needle setting instruction see page No. 6
^ Bent or eye of needle :
too sharp
Try a new needle
Bent or blunt needle
Discard all blunt or bent needles and replace
with new
Material
Puckering Tensions too tight See tension adjustment page No. 13 and 14
Dull needle ! Change needle
Stitch length too long Reduce stitch length