Removing the work, Setting needle position, Setting needle position -17 – SINGER W1065 User Manual

Page 18

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Text mode
Original mode

REMOVING THE WORK

Be sure to stop the machine when the thread take-up lever and needle bar l°^^*ed at the

hiahest position Now raise the presser foot and draw the fabric back and to the e , g.
is 27, and pass ,ha threads over the thread cutter. Pull dowrr sl.ghtly

holding

thread rn both

hands, so as not to bend the, needle. Leave the ends of thread under the presser foot.

Fig. 26

Fig. 27

SETTING NEEDLE POSITION

The needle bar should be at its highest point when adjusting needle position to avoid tearing

levar to right, center or left for corresponding needle positions.