Manual operation, Overcasting worn edges, Patching – SINGER W1065 User Manual
Page 31: Applique
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
31
»
t
MANUAL OPERATION
Be sure standard zigzag presser foot, zigzag needle plate, are in
place and machine is set for manual operation.
Use for :
OVERCASTING WORN EDGES
Zigzag stitch along the worn edges, catching the fabric as the
needle swings to the left, and allowing the needle to just passover
the edge of the fabric on the right.
PATCHING
Machine baste patch into place under hole or worn area which
has
been
cut
away.
Then
zigzag
stitch
the
patch
into
place
by
overcasting around edge of hole.
outlining it entirely and
remove
excess
material
on
the
outer
edge
by
trimming
it
away
after
stitching.
Fig. 55 - Baste design
to fabric and overcast a
zigzag stitch around the
design
outlining
it
en
tirely.
And hundreds of others
uses will become apparent as you continue to use the machine
APPLIQUE
Fig. 57 - Baste design to fabric and zigzag stitch following
the shape of the design
C
Fig. 55