Attachments, Attachment foot – SINGER W1065 User Manual
Page 43
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
45
ATTACHMENTS
Fig. 77
EDGESTITCHER
The edgestitcher is used in mak
ing
dainty
lace
insertions,
edgings
and piping.
The
slots
in
the
edgestitcher
serve as guides in sewing together
various
pieces
of
material.
If
you
want to sew lace, lace and embroi
dery, or lace and tucked strips togeth
er, place the piece of material that
will be on top in slot 1 iFig. 78;
and the lower fabric in slot 4. For
instance, if you are sewing lace edg
ing to a finished edge of fabric place
the fabric in slot 1 and the lace in
slot 4 Fig. 79.
le nr-eille posit
riooii r)osiп^)a
iiip lever IS in 'ire
ATTACHMENT FOOT
In order to attach the binder, edgestitcher and
the hemmers, it is necessary to remove the presser
foot and replace it with the attachment foot. Fig. 77.
Mount
binder,
edgestitcher
or
hemmers
sliding
the attachment to the left as far as possible and
tighten screw.
The mounting slot enables you to sew as close
to or as far away from the edge as desired. Just move
the attachment to the correct position before tighten
ing the mounting screw.
Fig. 78