SINGER 6136 - Manual (Page 40)

0, iiaiiisiici I'Oir Yoiiiir lYlKiCiiriiise
CLEANING YOUR MACHINE
CAUTION: Bcforo cloanif)g your machino, dis­
connect power fine plug f r o m your socket
outlet.
With a soft cioth or lint brush, cioafi all points
indicated by arrows, espociaiiy the bobbin
case area and feed. Also, clean exposed parts.
If necessary a mild solution of soap and water
may bo used to remove stubborn stains. No
other cleaning liquid or powder should be
used.
Periodically apply a drop of oil only to the
areas indicated after cleaning.
REMOVING BOBBIN CASE REPLACING BOBBIN CASE
Raise needle, open slide plate, remove
needle plate and lift out bobbin.
Turn bobbin case holder A to back as far
as it wilt go.
Lift out bobbin case B.
Insert bobbin case with a back and forth
motion, so that front of the case is under
the position plate C. Turn holder all Uie
way forward to lock bobbin case.
Replace needle plate and close slide plate.