Satin stitching, Accessory and selector settings, Adjusting stitch length – SINGER 6136 User Manual
Page 23: Adjusting needle thread tension
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
satin stitching
When you vvisli to p?‘oduco a satin stitch п“>ако
a tost sample first so you can adjust stitch
length and thread tension properly. Soft fabne
rriay require a backing to i>nsui4i a firm stilcli.
Cnsp organdy, ta4vn or a tusd^tc intoriacing
arc suitat)!e for this f)urpo$o.
Accessory and Selector Settings
Pc'ittorn Orouo Solector; /
Noerilo Position
_L : J.
Stitch Width: ;
Stitch t.onolh:
0
to
1
(ionorai fhirposo Noodle Plate
Sjcaaai Purpose f oot
ADJUSTING STITCH LENGTH
» Turn stitch lenglli selector dial to
1.
• i^un the machine at a slow speed and grad
ually turrt stitch length dial clockwise until
stitches arc closely spaced and form a
smooth surface.
ADJUSTING NEEDLE THREAD TENSION
Satin stitching requires less tension thafi
straight stitching or open ¿'ig-;iag stitching,
f'ui thoimore, the wider the stitch, the lighter
the tension on the thread must be. Notice the
stitching ori your sample. If the fabric is puck
ered. lower the noodle thread tension by
turning tlK'i tension dial to a lower number.
Incorrocl
Correct