Step 1: bar tack, Step 2: side stitching, Buttonholes – SINGER 6136 User Manual

Page 34

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

buttonholes

• Pallom Group Solocior: /

• Stitch l3alanco Dial: Neutral positioti

• Buttonhole J'ool

Always make a lest buttonhole on a sample in

your fabric. Be sure to duplicate thickness of

garment and include interfacing.

If the two lines of stitching in your sample arc

of unequal density refer to the next page.

Place work under buttonhole fool, align centre

marking of buttonhole A with rod tine on foot,
and align end marking of buttonhole B with
horizontal line on foot. Oo not lower the needle.

FOUR-STEP BUTTONHOUNG

Step 1: Bar Tack

Turn buttonhole dial ciockwise to stop
1. Position needle in fabric at point A:

Lower the foot and stitch the first bar

tack taking at least four stitches end

ing at point B,

step 2: Side Stitching

Raise needle above fabric by turning

hand wheel fowa/d you.
Turn buttonhole dial olockwiso to step
2. Stitch to the end of buttonhole at
point C.