SINGER 6136 - Manual (Page 32)

/ \ / 'v .
' V V'
MULTI-STITCH ZIG-ZAG
s
\
/ The mutti-stitch zig-zag is an extremely versatile stitch. Use it to mend, join or re-
inforcc without bulk. With this stitch you may attach elastic and stretch lace, con-
struct lingerie and swimsuits and finish seams. There are many other useful
\ applications for the multi stitch zig-zag.
< ,s /S A f -
'' •' 'v ^ ' / \ ^ N / S /
S' V S' S'
\ S '
’ \ ^
V S'*
n
t
^ I ^
Bar Tacks
f\ottom Group Soloctor:
Noodle Position:
Stitch Width: | |
• Stitch Longtt>: 0
• General Purpose Needle Plate
• General Purpose Toot
11^ipilli
ixWxSx::::::::::?; ;
3 1
Belt Loops on
Pliilshed Garment
Make a tost sample, using scraps of yoiir ma­
terial, and duplicating ail garment thickness.
1. Mark position for the finished end of belt
loop on the fabric.
• f^lace belt loop, wrong side up, straight
stitch with cut end 3 mm (1/8 inch) from
edge of garment; do not stitch beyond
edges of the belt loop. Trim the ond close
to the stitching and press.
2. Pold belt loop back on the stitching line and
press.
• Sot your machine according to the code
above.
• Stitch 3 mm (1/8 inch) from the fold using
the muiti-stitch zig-zag stitch.
3. I'old over second part and bar lack.
Mending a Tear
• Trim ragged edges.
o Place-underlay on the wrong side of tear
for reinforcement. (Do not baste or pin the
underlay, since you will be bringing the
edges together in the next stop).
• Stitch on the right side, bringing the edges
of the tear together. Shorten stitch length at
ends and corners to give extra strength.
• Trim underlay.
30