Ihteiìding the ttìaohine – SINGER 6136 User Manual
Page 15
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
ihteiìding the ttìaohine
• xBàiso iho pressoi fool to rcioaso U
mìsioo
: : discs and make suro nood!c and tako-up
: lovor aro in tiiyhost position.
Placo spool pin foil from accessories ovor
-
spool
pm,
and
placo
spool
of
thread
on
■ spool: pin over folt, wilfi spool thread ro^
lalnirip slit
A
on top.
•
• Keep ricchi hand on spool of thread to hold
- firmly in place Avhiie threadinejmachine,
•
Snap thread into upper thread puide
1
.
• :Pass thread through point 2.
• Thread the needle thread tension 3; Slide
thread overmetal plate into tension discs:
Lead thread under fieedle thread tension
and through tension wire by firmly pulling
thread straight tip.
• Puli thread to ligtit behind point 2 guiding
thread up toward take-up lever. : - ^
• Pass thread through points 4 to 6 iU: shown.
• T bread needle from front to back and draw
about 10 cm (4 iftches) ot thread through
eye of needle.
13