Setting stitch width, Setting stitch length, Setting selectors – SINGER 8019 User Manual
Page 16
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
setting selectors
Needle-Thread
Tension Dial
Stitch
Width Pattern
Selector Group Selector
Stitch Pattern
Selector
Needle
Position
Seiector
Stitch
Baiance
Control
Stitch Length Selector
Setting Stitch Width
The Stitch width selector does two jobs: it
sets the machine for straight stitching, and
it controls the width of zig-zag stitching. Four
stitch width settings are indicated plus a
setting for straight stitching.
Before m oving the selector, m ake sure needle
is above the fabric.
To set stitch width,
slide the seiector lever
until indicator line is aligned with desired
setting.
Straight Stitching:
Set the selector at
Zig-Zag Stitching:
To suit sewing
application, set the selector at any zig-zag
position between | (narrow-position) and
S (wide-position).