Preliminary steps connecting machine, Operating machine, Preliminary steps – SINGER 8019 User Manual
Page 10: Getting ready to sew
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
2
Getting Ready to Sew
preliminary steps
Connecting Machine
Before plugging in your machine, be sure that
the voltage and frequency indicated on the
right end of the machine are within the range
marked on the electric meter installed by your
power company.
Insert the machine plug A into the machine
socket B at the right end of the machine, and
connect the power-line plug C to your elec
trical outlet.
CAUTIO N:
Disconnect
the
power-line
plug
from the socket outlet when changing needle,
feet or needle plates or when leaving the
m achine
unattended.
This
elim inates
the
possibility of starting the m achine by acci
dentally pressing the speed controller.
To run the machine, press the speed controller
E with your foot. The harder you press, the faster
the machine will sew. To stop machine, remove
foot from controller.
Operating Machine
To turn on the machine and sewing light, press
upper portion of power switch (D).
CAUTION:
Because
of
the
up
and
down
m ovem ent of the needle, you m ust work care
fully and watch the sewing area when operat
ing the m achine.
8