SINGER 14U52 - Manual (Page 4)

1. Selection of stitches
This machine is capable of producing various types of stitches according to the combination of needle
positions, threading methods, tension adjustment and the use of convertible right looper/spreader.
Stitch Type
Reference
Pages
(J) Two-Thread
Wrapped Edge
Overlock
1-needle 2-thread stitch is used for
seaming lightweight or stretch fabrics.
Also ideal for rolled hemming. Also,
a 3.5mm and 5.7mm overlock seam
width can be obtained by changing the
needle position.*
10
11
12
13
(D
Two-Thread
Overedge
1-needle 2-thread stitch is used for
overedging common fabrics. It is also
ideal for flatlock (butted or lapped)
seams and blind hemming. Also, a
3.5mm and 5.7mm overedge seam
width can be obtained by changing the
needle position.*
10
11
12
14
@ Three-Thread
Overlock
1-needle 3-thread stitch is used for
overedging and seaming on common
fabrics. Also, a 3.5mm and 5.7mm
overlook seam width can be obtained
by changing the needle position.*
15
16
d) Three-Thread
Flatlock
1-needle 3-thread stitch is used for
butted or lapped seams and ornamental
stitching with decorative thread. Also,
a 3.5mm and 5.7mm flatlock width
can be obtained by changing the needle
position.*
15
17
(5) Three-Thread
Wrapped Edge
Overlock
1-needle 3-thread stitch is used for
sewing narrow rolled hems or
ornamental edges. Also, a 3.5mm and
5.7mm wrapped overlook seam width
can be obtained by changing the needle
position.*
15
18
(6) Three-Thread
Ultra-Stretch
Mock
Safety Stitch
2-needle 3-thread stitch which is
ideal for lightweight, extremely
stretchy fabrics such as tricot and
spandex.
19