SINGER 14U52 User Manual
SINGER Sewing machines
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Table of contents
Document Outline
- 14
- 14U46B
- 1. Selection of stitches
- 2. Handy reference chart
- 3. Principal parts
- 4. Preparation for sewing
- 5. Preparation for threading
- 6. How to sew two-thread overlook and overedge
- 7. How to sew three-thread standard overlook, flatlock and wrapped edge overlook
- 9. How to sew four-thread ultra-stretch mock safety stitch
- 10. How to adjust stitch length
- 11. How to adjust overedge seam width
- 12. How to do rolled hemming
- 17. Two-thread flatlock stitch
- 19. Braiding by chaining-off
- 21. Applying elastic
- 22. Turning square corners
- 23. How to replace stationary knife
- 24. How to exchange light bulb
- 25. How to adjust presser foot pressure
- 26. Reasons for poor stitches and how to make adjustment
- 14U46B