How to sew two-thread overlook and overedge, How to sew two-thread overlock and overedge – SINGER 14U52 User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
6. How to sew two-thread overlook and overedge
The 2-thread overlook and overedge is sewn with one needle, one looper and a spreader.
(1) Convert right looper into spreader
The right looper used in this machine can be easily converted into spreader.
1. Remove right looper thread. (Orange thread path)
2. With the small screwdriver, turn spreader conversion screw
clockwise as far as it will easily turn. Do not over turn.
The right looper will now serve as a spreader.
Spreader conversion screw
• Converting spreader
back to right looper
1. With the small screwdriver, turn spreader conversion screw
counterclockwise as far as it will easily turn. Do not over turn.
The right looper will now serve its purpose of looper.
2. Thread the right looper.
10