SINGER W571 - Manual (Page 37)

36
Be sure to draw the lace and material under the needle and back of the edgestitcher so that
the feed will carry it backward as you stitch. Holdthe fabric in the left hand and the lace
in the right, being sure the fabric overlaps the lace slightly.
Rick Rack can be sewn to the edge of the material in the same manner.
To trim with wide piping, place the fabric in slot 4, and the fold of the piping to the left
in slot 3, for a narrow piping place fabric in slot 2 and the folded edge of the piping to the
right in slot 3.
Slot 5 may be used as a guide in stitching a French seam.
See Figs. 54~57 for suggestions on how to use the edgestitcher. There are hundreds of
other uses.
Fig. 54
Fig. 55 Fig. 57