SINGER W571 User Manual
Page 19
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
18
F Set stitch width at 5, stitch length at
UA-
Do a few zigzag stitches, drop feed for 3 or
4 stitches, then raise it again. By operating the drop feed button rhythmically. It is not
necessary to count stitches.
G. Drop feed, lock stitch width at 5, take 3 or 4 stitches, leave needle in fabric left of stitches.
Pivot fabric on needle to make next daisy petal. Continue until flower design is com
plete.
Lock threads by setting stitch width at 0 and taking 3 or 4 stitches in center of design.
DECORATIVE STITCH DESIGNS
To
sew
the
decorative
stitch
designs
set
machine
as
follows:
(1) Needle position lever (20, Fig. 24) at ”R".
(2) Buttonhole lever (24, Fig. 24) at "M".
(3) Stitch length dial (3, Fig. 24) near 0.
(4)
To select a pattern, hold release lever (22, Fig. 24;
to the right as far as possible - then move pattern
selector lever (19, Fig. 24) to desired stitch design
setting.
,
i»
C;
C
»r
Ir
w