SINGER W571 - Manual (Page 15)

14
REMOVING THE WORK
Be sure to stop the machine when the thread take-up
lever and needle bar are at their highest position.
Now raise the presser foot and draw the fabric back
and to the left, (Fig. 21-A and B), and pass the thread over
the thread cutter.
Pull down slightly, holding thread in both hands, so
as not to bend the needle.
Leave the ends of thread under the presser foot.
Fig. 21-A
Fig. 21-B
li
1='
I
►
►
w
1»
ilf
I*
§, ^