SINGER 513 Stylist - Manual (Page 54)

Your machine will serve you perfectly for many years If you take a few
moments of your time to keep it dean. How often you will need to clean the
machine will depend on how often you use it.
CAUTION : Before cieaiiiog your machirie^ disconnect
plug from electrical syppiy.
-line
Clean
Clean
'-i-—7
" é
\.
Remove lint or fluff from exposed parts.
With a soft cloth, clean:
® Tension discs, take-up lever, and thread
guides.
© Presser bar and needle bar.
© Bobbin case. (If there is an excessive
amount of lint in the area, remove the
bobbin case for cleaning. See page 54
for instructions.)
© Machine surface. (If necessary, dampen
the cloth and use a mild soap.)
Remove face plate as instructed on page
53, and clean area behind it with a lint
brush t-
Remove needle plate as instructed on
page 7 and, using a brush, clean the
rotating hook area under the needle
plate and slide plate.
After cleaning, apply SINGERS oil at
points indicated on these pages.
Approximately once every year under
normal conditions, clean and lubricate all
moving or rotating machine connections
to ensure freedom of movement and to
protect metal parts from excessive wear.
To remove top and bottom covers, follow
instructions on page 53.
|A lint brush designed for this purpose is available
for separate purchase at your local Singer Sewing
Center.
52