Straight stitching – SINGER 513 Stylist User Manual
Page 18
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

STRAIGHT STITCHING
FieKi-Stitck
Pattern Dial Off
© Fiexi-Stitch Pattern Dia!: O (Off)
© Pattern Selector: Any setting
® Needle Position : i
® Stitch Width : s
® Stitch Length :‘To suit fabric
# General Purpose Needle Plate
® General Purpose Foot
l^eedie Position
1 ?
?
!
/
>
Before you move the selectors to set your
sewing machine for siraiglit stitching,
turn the hand wheel toward you until the
needle is above the needle plate.
SETTiWG THE ifViACHII\IE
© Turn FiexhSiitch pattern dial to off
position 0.
® Move needle position selector to
(center).
® Set stitch width selector on \
.
STARTING TO SEW
® Place needle and bobbin threads under
presser foot and draw to back of
machine.
® Position the needle in the fabric where
desired for stitching start.
® Lower the presser foot and start the
machine.
To sew perfectly on a wide variety of
fabrics, adjust stitch length, pressure and
thread tension as instructed on the
following pages.
For in formation on straight stretch stitch-
turn to page 26.