Zig-zag stitching – SINGER 513 Stylist User Manual

Page 24

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

ZIG-ZAG STITCHING

The zig-zag stitches built into your sewing machine include basic zig-zag

patterns and F/exi-Stitch patterns. Basic zig-zag patterns and their selector

settings are shown below; information on Flexl-Stitch patterns starts on

page 26. You will find instructions for both decorative and practical uses of

these patterns in the section called "Sewing the Professional Way"

beginning on page 35.

BASIC ZIG-ZAG PATTERNS

Plain Zig-Zag Stitch. Used for buttonholes, button sewing, bar tacks and

appliqué.

Blindstitch. Indispensable for finishing hems and seam edges and for zipper

insertion.

FlexFStitch Dial Off

TO SEW A ZIG-ZAG STITCH

Turn Ffexi-Stitch dial to off setting 0.

Set pattern selector for stitch desired.

Adjust stitch length, stitch placement,
stitch width and needle-thread tension

as instructed on the following pages.

For Zig-Zag Stitching

SETTING PATTERN SELECTOR

Set the stitch width on \ before moving

pattern selector dial.

The pattern selector, located above the

stitch width selector on the front of the

machine, controls stitch selection.

For Bfindstitchirig

Pattern Selector

For Blindststching

® Move selector dial toward