Elastic waistbands, Replacing blanket binding – SINGER 319K User Manual
Page 107
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
105
ELASTIC WAISTBANDS
Use: All-purpose Throat Plate and
Presser Foot
Central Needle Position
2 Bight
12 Stitch
Lever A
Stretch elastic while stitching to provide the degree of
fullness required in the garment. If a waistband, fit elastic
for snugness on the individual and join ends of elastic.
Divide both elastic and garment into quarters and pin at
these intervals. Stretch elastic between these points to dimension of garment while stitching. With
top edge of elastic in line with raw edge of garment, zigzag two rows, following the cords in the
elastic. Trim away raw edge of garment near top line of stitching.
Fig, 206, Renewed Elastic Waistband
Wm
REPLACING BLANKET BINDING
The multiple stitch zigzag is an excellent stitch for apply
ing blanket bindings and affords both a decorative and
durable finish. Remove worn binding. Baste new binding
securely in place. Stitch, using the All-purpose Throat
Plate and Presser Foot, 5 bight, 12 to 25 stitch and
Multiple Stitch Zigzag Lever B. Increase pressure adjust
ment to accommodate the thickness of the blanket.
Fig, 207, Blanket Binding Replaced