Threading the, Bobbin case – SINGER W167 User Manual

Page 9

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

THREADING THE

BOBBIN CASE

Step 1 (illustrated in Fig. 6).

Hold bobbin case between thumb

and forefinger of left hand, so that

the slot in the edge of the bobbin

case is on top.

Take the bobbin between thumb

and forefinger of right hand so'^that

the thread on top leads from left ^ to

right.

Step. 2.

Insert bobbin into bobbin case,

pull the thread into the slot of the

bobbin case as shown in Fig. 7, and

draw it under the tension spring and

into the fork-shaped opening of the

spring as shown in Fig. 8.

Fig. 6

Fig. 7

slot

;

Fig. 8