To make mechanical designs – SINGER W167 User Manual

Page 18

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

TO MAKE MECHANICAL DESIGNS

Move the stitch width lever 2 Fig. 1 to the widest position with your right hand and k

It there while rotating the pattern selector dial clockwise with your left hand to desired p
tion Release the zigzag stitch width lever and allow 17 to spring back to the 0 positioi
Set stitch regulator knob 7 ^ Fig. 1 = for desired length. i Near 0 as possible without stopi

the feeding for the most compact designs '

u ■

When you set the button hole change lever at M position, you can sew mechanic pa t

illustrated on Fig. 25.

With the buttonhole lever at the red point beside the first step

buttonhole, you can sew mechanic patterns illustrated on Fig. 26.

- -

change.

LEFT NEEDLE POSITION

Fig. 25

This is needle posi

Fig. 26