How to use accessories – SINGER W167 User Manual

Page 22

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

If a four hole button is to be sewn, follow the

same procedure above for the two hole button. Now
lift presser foot slightly and move fabric to permit

stitching the remaining two holes. Hooks, snaps, etc.,
are sewn to the fabric with the same procedure as

for sewing two hole buttons.

HOW TO USE ACCESSORIES

NARROW

HEMMER

With

the

needle

its

highest

position,

replace

regular

presser

foot

with

narrow hemmer Fig. 31 >. For a plain narrow hem,
make a 1 8 inch double fold for about two inches
along edge of fabric. Hold each end of the two
inches fold, slip underneath hemmer. Bring fold up

into the scroll of hemmer, draw forward to end and
fasten with point of needle. Lower presser bar lifter.
Gently pull ends of thread as you start stitching.

Guide material slightly to right, and it will automatic
ally take a double turn through scroll.

LACE TRIMMED HEM To sew a narrow hem

and attach lace in one stitching, insert lace in the

slot next to needle i Fig. 32 i. Sew hem as above,
guiding lace under needle and hem into scroll.

Fig. 31

Fig. 32