SINGER W1550 - Manual (Page 21)

STITCH LENGTH L„AL, .EVERS,NG BUTTON AND DROPPING T,
lO r'hanno +u« i_ .1 _
Jo change the length of the stitches
proceed as follows:
Turn the dial so that the number for the
required stitch length is at setting mark.
sl tr-hT T approximate
stitch lengths in mm. The lower the
reverse STITCH;
Press center of the stitch length dial
reversing button) and hold for reverse
feldi ™"^®diately start
feeding backwards. Release button and
machine will resume normal forward
sewing.
.'!,ddrf“"r
andd„Bw„h„d,ha.in8,„,ie,h,„ds
and for strengthening seams. '
dropping the f e e d DOG:
Embroidering and darning are best
carried out with the feed mechanism
disengaged. This is done by setting the
tie f drops
he feed and allows the material to be
moved freely under the needle
The feed starts its normal function again
as soon as you turn the stitch length
dial to 0" or beyond it.
stitch leng
.■w/-- * •