Changing the needle, To select a suitable needle – SINGER W1550 User Manual

Page 13

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

-^1

{__ _

.......

(4)

(3)

CHANGING THE NEEDLE

1. Turn the hand wheel towards you

until the needle is at is highest posi

tion.

2. Loosen the needle clamp screw by

turning its top edge towards you.

Remove the needle from the

damn.............

3. Place the new needle into the needle

clamp with its flat side facing away
from you. Push the needle up into

needle clamp as far as possible.

Tighten the needle clamp screw

firmly.

TO SELECT A SUITABLE NEEDLE

Stem

A number indicating the size of

needle is marked on the stem. The

higher the number, the thicker the
needle.

Do not use any needle which is bent

or blunted.

T—)

a'l-lt

I —f: ■ ri^V 'iL.lL--