Sewing light, Foot control, Electronic speed controller – SINGER W1550 User Manual

Page 10

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

ELECTRONIC SPEED CONTROLLER

Push the speed control plug onto three

prong connector.

Plug machine cord into any 110 ~ 120

volt wall outlet.

Turn light on and off by pushing light

switch.

SEWING LIGHT

The sewing light is located in the face

cover as shown. To replace the bulb,

turn the light off and open the face

cover. Push the bulb up and turn the

bulb counter-clockwise and remove d

from the socket.

Push a new bulb m and turn it clockwise.

NOTE:

First, unplug the machine prior to re

moving and replacing the bulb. Be

aware that the light bulb may be warm.

FOOT CONTROL

Step on this control to start tosew. The

harder you press on the control, the

faster the machine will sew. Slow down

by reducing foot pressure on the control.

You may want to practice your speed at

different levels when you first use the

machine.