Removing and attaching the presser foot, To remove, To attach – SINGER W1550 User Manual

Page 14

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

REMOVING AND ATTACHING THE PRESSER FOOT

To Remove;

1. Turn the hand : wheel towards you until

the needle is at its highest position. Raise

the presser foot by lifting the presser foot
lifter.

Presser -^ / |

1 ^ ' foot

(D '....

^ 2. By lifting the^Jeveron^he back of the foot

holder, the presser foot will drop off.

Note: *Do not force the presser foot to

remove it.

To Attach:

1. Place the presser foot so that the pin on

the foot lies just under the groove of the

foot holder. Lower the foot holder.

2. When the presser foot lifter is raised

you'll find the presser foot is locked in
place.

(D ^