The pattern selector, Selecting stretch stitch, Triple straight stretch stitch – SINGER W1550 User Manual
Page 20
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
THE PATTERN SELECTOR
The desired pattern can be selected by turning
the pattern selector dial. The marks on the dial
correspond to the patterns shown on the panel
respectively, as follows:
A(
c
JD ) straight stitch, middle needle posi
tion
Bi
) straight stitch, left needle position
E(
F(
G(
ilgzagTIitch with variable width
) 3-step-stretch-zigiaf-stitch - -
-
^
) stretch blindstitch
^ ) double action stitch
^
) reverse blindstitch
m ^ m automatic buttonhole sewing
Selecting Stretch Stitch:
When sewing stretch stitch, set the stitch length
dial at "S.S."
When you release the "S.S.” engagement on the
dial, the stretch stitch mechanism will be off
automatically.
A(
c
S
d
) triple straight stretch stitch, middle
needle position.
B(
) triple straight stretch stitch, left
needle position.
C( Avwv ) triple zigzag stretch stitch or rick-
^ rack stitch
D(
^
) smocking stitch
E( ^
) fancy stretch stitch or blanket
stitch
F(
0
) double overlock stitch
G(
^
) overlock stitch
Note:* Raise the needle to its highest position
before turning the pattern selector.
16
If you use a twin needle,
zigzag stitch width should
be in the range "
”
(zigzag
width
less
than
" ff " mark).