SINGER W2134 - Manual (Page 19)

EMBROIDERING WITH A HOOP
It is easy to follow a stamped design or to work
free hand when embroidering or monogramming.
(See Fig. 26). Release the pressure from the foot
by pressing down the snap lock on the automatic
darner. Turn the drop feed knob to "DARN" posi­
tion. Stretch the fabric in an embroidery hoop,
removing the presser foot
presser bar lifter,
hoop slowly with both hands
path of the needle.
i __£
Fig. 26
snd. plac© unci©r th.© ne©cil© aft©r
Set the stitch width at the size you prefer and lower the
Then operate machine at a rather high speed while moving the
Work carefully and be sure to keep lingers out of the
MAKING BUTTONHOLES
First, mark the begimiing and end of the buttonhole on fabric with a basting line or
tarlors chalk. Make one on scrap fabric (following directions below) to be sure
machine adjustments are correct.
1. Replace presser foot with buttonhole foot which is grooved deeply underneath to
..... 23