SINGER XL1 Quantum User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Thread spool cap (small)
spool
i
c.
Thread spool cap (large)
Tension screw ^ l^fdad path
'
Thread tension spring....
targe spool
I
Use the smait cap for
a small spool, anci the
large cap for a large
spool.
The bobbin case furnished with the
machine is factory-adjusted to provide
the proper thread tension, so do not
tamper with the tension screw.
8
Place the bobbin on the bobbin
winding shaft.
9
Depress speed controller
to wind bobbin.
10
Push the bobbin back to the left.
the winding regulator. itself when full.
Cut the thread and take
the bobbin off the shaft.
11
Place the bobbin in bobbin case.
12
Replace the bobbin case into machine.
(1) Fully open the latch, and securely fit the bobbin case into
the hook.
(2) Snap the latch closed on the bobbin case.
(3) Close the hook cover.