Automatic needle threading, Automatic needle-threader – SINGER XL1 Quantum User Manual
Page 11
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Automatic Needle Threading
Lower the presser foot lifter.
The needle should be in the highest
position.
n
Push the threading lever down.
10
Push the threading lever all the
way down and a hook will go
through the eye of the needle.
Lower the threading lever and hook the Pass the thread in front of the needle
thread onto
(
a
).
and below the hook.
12
Release the needle threader and it will Pull the loop of thread that is at the
return to its original position
back of the needle out about 4".
Caution:
1. Do not lower the threading lever
while the sewing machine is in
operation.
2. The automatic needle threader will
not work on twin needles.
Pulling Up Th© Bobbin Thread
Hold the needle thread lightly
with the left hand and turn the
handwheel toward you until
«
m
the needle enters the needle
IJ plate.
Drop the bobbin thread and
tighten the hold on the needle
»m
thread until the bobbin thread
Is pulled up.
holding the needle thread until the
needie rises.
Pull both needle and bobbin
threads out about 4" and pass
• I. them under the pressor foot to
13 the back of the machine.