SINGER W ET 10 - Manual (Page 39)

3 5. CPTIOWAL EXTRA
On the foliowing pages you will find
illustrated and described a number of
'optional extra' to increase still further its
sewing performance.
' E¥EW FEED FOOT
Even Feed Foot enables you to sew hard-to-sew
fabrics without sliding or slipping and with
perfect matching. Use it for sewing leather,
ultra suede, shiny fabrics (vinyls, patents and
satins), bonded fabrics, pile fabrics and
matching stripes, plaids and patterns. It is not
recommended for use when stretch stitching.
To attach the even feed foot;
I Raise the needle to its highest position. Raise
the presser foot lever.
2. Loosen the presser foot thumb screw and
remove the presser foot holder.
3. Guide the even feed foot into position from
the rear of the machine.
4. Attach the presser bar clamp to the presser
bar and tighten the presser foot screw with
the screwdriver.
5. Attach the screw (A) provided with the foot
to the needle clamp through the fork arm and
tighten securely.
TUFTING FOOT
This special presser foot is designed to make
Thread loops or tufts which can be utilized for
embroidery sewing or tailor's tacks.
Machine settings:
Stitch selector - 2nd or 3rd of the narrow
zig-zag stitches
Thread tension control - 0
EMBROIDERY
Attractive embroidery designs decorated with
thread tufts are produced by using this foot with
stitch length control between 0 and 1.
TAILOR'S TACKS
Tailor's tacks are used to transfer construction
marking from paper pattern onto double layers
of fabric. Set stitch length control between 0
and 1 or use darning plate. Sew several stitches
and then guide the fabric with your hands
Repeat this process. To remove pattern, cut top
thread loops and thread between tacks.
Separate the layers of fabric clipping thread
between them.
Further details of their availability, together
with the current price can be obtained from
the place from which you purchased your
machine, or in case of difficulty direct from
ourselves.
Needle
clamp
Presser foot
thumb screw
Presser bar
clamp
Presser bar
Fork arm
37