SINGER W ET 10 - Manual (Page 14)

THIilADIPJG TOP THREAD
Thread the machine in the follcjwing
order as'illustrated.
1
.
2
.
Raise the presser foot lever. Raise the
needle to its highest position by rotating
the hand wheel towards you.
Draw the thread from the spool passing
through the top thread guide, and pull it
towards you.
Holding the thread from spool with your
right hand, pull it downward positively
through the tension slot.
3. Slip the thread through the .thread guide
below needle clamp.
Thread the needle from front to back, and
draw about 4" (10 cm) of thread through
the needle eye towards the back of the
machine.
.
12