Stitch, Ric-rac stitch, Smocking stitch – SINGER W ET 10 User Manual
Page 31
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
TRIPLE STRAIGHT
STITCH
SETTINGS .
Stitch Selector - il!
Stitch Length - Yellow Range
1
ripie straight stitch is far stronger than
ordinary straight stitch because it locks three
times — forwards, backwards and forwards.
It is particularly suitable for reinforcing the
seams of sportswear in stretch and non
stretch fabrics, and for curved seams which
take a lot of strain.
Use this stitch also to top-stitch round lapels,
collars
and
cuffs
to give a
professional finish
TO your garments.
RIC-RAC STITCH
Stitch Selector - %
Stitch Length - Yellow Range
Ric-rac is a quick method of finishing a raw
edge and providing a decorative top-stitch in
one operation. It is ideal for edging neck
bands, armholes, sleeves and hems.
SMOCKING STITCH
» (Model ET-10 only)
Stitch Selector - ^
Stitch Length - Yellow Range
1. Sew rows of straight stitches 1 /2" (1 cm)
apart. Draw up the bobbin thread to
gather the fabric to the required lingth.
If required, back the gathering with a strip
of fabric or bias binding.
2. Sew smocking stitch between the rows of
gathering. When complete, remove the
gathering stitches.
Note; When smocking a garment, the stitch
ing should be done before the piece is
sewn into the garment.
29