Sears 385.17724 User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SECTION 2 PREPARE YOUR MACHINE FOR SEW'NG
Set Up the Machine
o Plug m the Machine and Switch on the Power
machine, be sure the power switch is
O F F .
1. Check your outlet to be sure
It IS
a 110 to 120
Volt AC outlet.
2.
Insert the machine plug into the three-prong
outlet, as shown. It will only fit one way.
3.
Insert the power supply plug into the outlet.
• Foot Control Use
r
SAFETY FEATURE:
Your machine will not operate unless the
iight/power switch is turned on. If you are
interrupted or stop sewing, turn off the
light/power
switch
to
prevent
injury
to
children.
The foot control regulates the speed at
which you sew.
To increase speed, gently press down with
the ball of your foot.
To decrease speed, release your foot pres
sure slightly.
NOTE:
The toot control is sensitive and
will increase or decrease your
sewing
speed
immediately.
Practice on a scrap of fabric to
regulate your sewing speed to
your taste and needs.