Sears 385.17724 - Manual (Page 14)

SECTION 2. PREPARE YOUR MACHINE FOR SEWING _
e Presser Foot Types
Zigzag Foot Straight Foot
To Snap On
1. Place the presser foot so the hori­
zontal pin on the foot lies just
under the groove of the foot
holder.
2. Lower the presser foot holder to
lock the presser foot in place.
NOTE: If you do not hear the
presser foot snap in place,
press down on the presser
foot holder firmly until you
hear the snap.
stitching.
Uses; Zigzag stitching (see page 31),
Bar tacking (see page 33),
Button sewing (see page ^),
Rick-rack stretch (see page 36),
Three-step zigzag (see page 37),
Overcast stretch (see page 38),
Lace work (see page 40),
Two-point shell stitching
(see page SO),
Smocking (see page 51),
Stretch patching (see page 51),
Fagoting (see page 52),
Herring bone stretch (see page 52),
Elastic stretch (see page 53),
Box stitching (see page 53),
Two-point box stitch (see page 64),
Overedging stitch (see page 54).
Use this foot exclusively for straight stitching
using center needle position only.
Uses: Straight stitching (see page 28),
Topstitching (see page 29),
Straight stretch (see page 30).
11