Sears 113.23522 - Manual (Page 31)

Ù2
PARTS LiST FOR CRAFTSIW m M 10" MITER SAWS
MODEL NO. 113.235220 & 113.235240 AND 113.235110
FIGURE 4
Key
No,
Part
No.
Description
1 820536 Dust Elbow
2 823956 Arm/Guard
3 823300 Washer Gup
4 823251 Arbor
5 821421-3 Ring "0"
6 STD601105 * Screw Pan Cr Ty ‘T’
10-32x1/2
7 823307 Bumper Guard
8 60288 Screw Lock Set 1 /4-20 x 3/8
9 S23303 ik Collar Blade
10 9-32194 At Blade Saw
10 9-32138 A Ht Blade Saw
11 823304 Screw Blade
12 823291 ^ tGuard Lower
13 821521-2 Screw Shoulder
14 823305 Link ActUHior
15 821521-1 Screw Shoulder
16 823840 ^ Retainer Guard
17 823292 • tSpring Guard
18 821521 Screw Shoulder
19 823306 Bearing Cam
P
13
■T!
f=i»
m
t stock Item - May be secured through the hardware
department of most Sears retail stores.
A Model 113.235220 & 113.235240 Only
H Model 113.235110 Only
^
WARNING: These items are important to the safety of this tool. Do not substitute common parts.
T CAUTION: See Mechanical Assembly Caution below.
• WARNING: Uncontroiled spring release or misinstallation of these parts may create a Hazard unless repair
is done by a qualified service technician. Repair service is available at your nearest Sears store.
CAUTION: Mechanical Assembly, to qualified service technician.
1. Wear approved eye protection when working with coil spring including spring, arbor lock 823322.
2. incorrect re-assembly of torsion spring 823328 can cause an unsafe condition because cutting head fails
to rise fulty to stop, or because spring fails through over-stress.
3. Improper reassembly of mechanisms controlling movement of lower guard 823292 can cause an unsafe
condition because guard fails to operate freely as cutting head is moved up and down.