Recommended accessories, Sears recommends the following accessories – Sears 113.23522 User Manual
Page 23
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Sears Recommends the Following Accessories
Recommended Accessories
WARNING: To avoid injury from unsafe acces
sories, use only accessories shown on fhe rec
ommended accessories list in this manual.
Prohibited Accessories
The use of any cutting too! except 10" saw blades
which meet the requirement under recommended
accessories Is prohibited. Do not use accessories such
as shaper cutters or dado sets, Ferrous metal (metal
with iron in it) cutting and the use of abrasive wheels
are prohibited. See WARNING and CAUTION notes in
the “Safety Instructions For Basic Saw Operations"
Section.' If planning to saw non-ferrous metal see those
WARNING and CAUTION notes in the “Safety
Instructions For Basic Saw Operations” Section
Leg Sets...... ................................................... 9-22244
...................... .......................... ....................,„..9-22246
Carblde-Ttpped Blades;
Trim Saw.................................................... See Catalog
Gut-Off..... ........................................ .,,,,See Catalog
Combination........................................... See Catalog
Plywood/Particle Board.......................... ...See Catalog
Non-Carbide Tipped Blades:
Cross CuyPlywGod........ ......................... -See Catalog
Combination...... ................................. .....See Catalog
Clamp......... ............................................... 9-29000
Table Extensions............................................ 9-29001
Crown Molding Jig......................................... 9-29002
Dust Bag............ . ........ ................... ................. 9-23467
1-1/4“ Sawdust Collector Hose.............. ......... 9-17866
Basic Blade Requirements
10" Diameter
Blades marked for 5,500 RPM or higher
5/8“ Diameter Arbor Hole
23