Sears 385.12514 - Manual (Page 9)

SECTION 2. PREPARE THE MAGHINE FOR SEWING
Set Up the Machine (Continued)
• Free-Arm Sewing: the Removable
Extension Table
Accessory Storage Box Change the Presser Foot
To Remove the Extension Table
{for free-arm sewing)
1. Grip the table with your index finger
and thumb, as shown.
The lid ot the accessory storage
box lifts open toward you.
Sewing accessories are conveni­
ently located in the box.
2. Pull gently to the ieft
table will snap out.
The extension
To Attach the Extension Table
{for flat-bed sewing)
1. Insert the tab and the pin into their
catches.
2. With your thumb and index finger,
gently snap in.
Use the correct presser toot tor
the stitch you wish to sew.
To change the various presser
toot, raise the presser bar to its
highest position by lifting the
presser toot lever.
Loosen the presser toot thumb
screw, choose the proper foot,
insert from the bottom.
Tighten the screw using the
large screw driver to make
certain the toot (s secure.
Choose the Needle and Thread
• To Change the Needle
toward you,
1. Loosen the needle damp screw by
turning it toward you.
2. Remove the needle by pulling it
downward.
3. Insert the new needle into the needle
clamp with the flat side away from you.
4. Push the needle up as far as it will go.
5. Tighten the needle clamp screw firmly
with the large screwdriver from the
accessory box.