Prepare the top thread – Sears 385.12514 User Manual
Page 13
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SECTION 2. PREPARE THE MACHINE FOR SEWING
Prepare the Top Thread
• Thread the Needie
The numbered steps above toHow the numbers
on the illustrations.
Dotted lines show places where the thread loops
and then is pulled tight.
Raise presser toot lever.
Place spool on spool pin as shown, with thread coming from the back oi the spool.
CD Draw thread into thread guide using both hands.
(D White holding thread near spool, draw thread down into the tension area and then around the check
spring holder.
(D Firmly draw thread up and through take-up lever from right to left.
0 Draw thread down and slip it into left side needle bar thread guide.
(D Thread needle from front to back.
NOTE; You may want to cut the end of thread with sharp scissors for easier needle threading.
11