Sears 113.235501 User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
3.
When the space between the square and the
blade is minimal, tighten the bevei lock knob. The
table should now be approximately 90“ to the blade.
4.
Loosen the screw holding the bevel scale
pointer and adjust to 0“. Tighten screw.
Remember, the bevel scale Is a convenient guide
but should not be relied upon for precision.
Make practice cuts In scrap wood to determine if
your angle seltirigs are correct. Adjust the table as
required.
BEVEL POSNTER
9