Sears 113.235501 - Manual (Page 6)

glossary of terms for woodworking
1 Kerf - the slot cut by the blade.
2. Leading Edge ■ the edge of the workpiece
which ts pushed into the blade first.
3. Sawblade Path - the area of the workpiece
directly in line with and moving toward the
sawblade edge. ^
4. Bevel - the ability to slant the table to make
angle cuts. An angle cutting operation through
the face of the board.
5. Blade Tooth Set - the distance that the edge
of the sawblade tooth is bent (or set) outward
from the side of the blade.
6. Trailing Edge - the workpiece edge last cut by
the sawblade.
7. Workpiece - the item on which the cutting
operation is being performed.
contents
Warranty information..................................................... 2
Safety Instruction for Scroll Saws.................................. 2
Motor Specs and Electrical Information..................... ....5
Qtossary of Terms for Woodworking..............................6
Unpacking and Checking Contents.............................. 6
Assembly............. ....................................................... '....7
Setting Table for Horizontal or Bevel Cutting... 8
Aligning the Bevel Indicator.................................... 8
Removing and Installing Blades....................................10
Mounting the Scroll Saw................................................ 12
Getting to Know Your Scroll Saw................................... 13
Operation..........................................................................15
Making Interior Cuts..................................................1 7
Maintenance..............................................................18
Wiring Diagram................................................................ 1 S
Recommended Accessories.......................................... 19
Trouble Shooting............................................................. 19
Repair Parts......................................................................20
Notes................................................................................. 22
Service Informaiion..........................................................24
unpacking and checking contents
TOOLS NEEDED
COMBINATION
SQUARE
WARNIMG: For your own safety never
connect plug to power source outlet until ail
assembly steps are complete and you have
read
and understand the safety and
operational instructions.
IMPORTANT: Never lift this saw by the arm
which holds the Wade or damage will occur
to your saw.
Separate all parts from packaging materials ana
check each item with illustration and "Table of
Loose Parts". Make certain ail items are accounted
for before discarding any packaging material.
.. ■■■... ............................. ГИД
MEDIUM FLAT BLADE SCREWDRIVER
If any parts are missing, do not attempt to
assemble the Scroll Saw, plug in the power cord or
turn the switch on until the missing
parts are
obtained and installed correctly.
Table of Loose Parts Qtv.
A 16" Scroll Saw........................................ ............. 1
B Blade Guard........................................... ........... 1
C Owner's Manual...................................... ............. 1
D Loose Parts Bag containing:
Blade..................................................... ........... 1
Switch Key............................................
NOTE; Hardware to mount this scroll saw to a
bench or leg set is NQI.........supplied. See mounting
instructions for recommended hardware size.