Philips DVP642-17 - Manual (Page 25)

DVD Menu Options
Audio Setup Menu
The options in the Audio Setup menu are:
‘Downmix’, ‘Digital Output’, ‘LPCM
Output’,‘Sound Mode’,‘Reverb Mode’ and
‘D.R.C. (Dynamic Range Control)’.
O Press SYSTEM MENU.
© Press A ▼ to select the ‘Audio Setup’ page.
® Press OK to confirm.
Downmix
® Press the AV keys to highlight‘Downmix’.
O Enter its submenu by pressing ►.
® Press AT to choose a setting.
^ LT/RT: Select this option if your DVD
Player is connected to a Stereo with a
Dolby Pro Logic decoder.
^ Stereo: Select this option if the TV or
Stereo has right and left Audio In jacks
but does not have Dolby Pro Logic.
® Press OK, then press A to return to the
Audio Setup Page.
Digital Outp
Set Digital output according to the
optional audio equipment you connected.
“AUDIO SETUP PAGE“
lAit 1
UKJMOUTRrr ■ ............................i
O Press AT to highlight‘Digital Output’.
O Enter its submenu by pressing ►.
© Press AT to choose a setting.
^ All: If you connected the DVD Player’s
Digital (Coaxial or Optical) jack to a
multi-channel decoder/receiver.
PCM Only: Only if your receiver is
not capable of decoding multi-channel
audio.
© Press OK, then press 4 to return to the
Audio Setup Page.
Helpful Hint:
- If DIGITAL OUTPUT is set to A//’, all
audio settings except MUTE are invalid.
LPCM Output
If you connect the DVD Player to a PCM
compatible receiver using Player’s Digital
(Coaxial or Optical) jack, you may need to
adjust‘LPCM Output’.
Discs are recorded at a certain sampling
rate, measured in kHz.The higher the
sampling rate, the better the sound quality.
-‘AUDIO SETUP PAGE--
tJQWNtol?^
0 Press AT to highlight ‘LPCM Output’.
O Enter its submenu by pressing ►.
® Press AT to choose a setting.
”»48K: Play a disc recorded at the
sampling rate of 48 kHz.
96K: Play a disc recorded at the
sampling rate of 96 kHz.
© Press OK, then press M to return to the
Audio Setup Page.
Helpful Hint:
- The average setting for most Discs is
48K.
27