Philips DVP642-17 - Manual (Page 10)

Connections
RF coaxial cable to TV
m
IMPORTANT!
- Component Video provides
higher picture quality. This option
must be available on your TV.
- Progressive Scan video quality is
only possible when using
Component Video (Pr PbY).
Using Component Video jack
(Pr PbY)
l
J
® Use the component video cables
(red/blue/green) to connect the DVD
Player’s Pr PbY jacks to the
corresponding Component video in jacks
(labeled as Pr/Cr Pb/CbY orYUV) on
the TV (cable not supplied).
O To hear the sound of this DVD Player
through your TV, use the audio cables
(white/red) to connect AUDIO OUT
(L/R) jacks of the DVD Player to the
corresponding AUDIO IN jacks on the TV
(cable supplied).
IMPORTANT!
- If your TV only has a single
Antenna In jack (labeled as 75 ohm
or RF In), you will need an RF
modulator in order to view DVD
playback on the TV. The RF
modulator is not supplied with the
DVD Player. See your electronics
retailer or contact Philips for details
on RF modulator availability and
operations.
Using an accessory RF modulator
® Use the supplied composite video cable
(yellow) to connect the DVD Player’s
yellow VIDEO OUT (CVBS) jack to
the video in jack on the RF modulator.
O Use the supplied audio cable (white/red)
to connect the DVD Player’s AUDIO
OUT (L/R) jacks to the AUDIO jacks on
the TV
10