Optional: connecting to an audio system, Optional: connecting to a digital receiver, Connections – Philips DVP642-17 User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connections
Optional: Connecting to an
Audio System
Optional: Connecting to a Digital
Receiver
® Select one of the video connections to
yourTV (CVBSVIDEO IN,S-VIDEO IN,
or COMPONENTVIDEO IN) depending
on the options available on yourTV.
® Use the audio cables (white/red) to
connect AUDIO OUT (L/R) jacks of
the DVD Player to the corresponding
AUDIO IN jacks on the stereo (cable
supplied).
Receiver has a PCM, Dolby Digital,
or MPEG2 decoder
W Select one of the video connections to
yourTV (CVBSVIDEO IN,S-VIDEO IN,
or COMPONENTVIDEO IN) depending
on the options available on yourTV
© Connect either the COAXIAL or
OPTICAL jack of the DVD Player to the
corresponding Digital Audio In jack on
your Receiver (cable not supplied).
© Set the DVD Player’s Digital Output to
PCM-ONLY or ALL depending on the
capabilities of your Receiver (see page 27
^Vigital Output”).
Helpful Hint:
- If the audio format of Digital Output
does not match the capabilities of your
receiver, the receiver will produce a strong,
distorted sound or no sound at all.
12