VACUUBRAND DCP 3000 - Manual (Page 45)

page 45 of 64
Depending on the amount of data and the transfer rate, the data output
may take a very long time. The output of 32765 readings from one sensor
takes up to 8 minutes at 19200 baud, longer than 1 hour at 2400 baud.
Recording of data is possible with any terminal program.
Example: Windows* HyperTerminal: Select ”Transfer menu - Capture
text”. In the file box, type a descriptive name for the file, and then click
”Start”. Send command ”IN_PV_D” or select at the DCP 3000 ”RS 232 -
Data - Send”.
* Windows is a trade mark of Microsoft Corporation in the USA and other countries.
000.00:00:06 0105.8 Torr
End
2. Data output in case of two connected pressure transducers (one VSK
3000, one VSP 3000), recording interval 5 seconds:
000.00:00:00 0105.8 3.70E-2 Torr
000.00:00:05 0105.8 3.70E-2 Torr
000.00:00:10 0105.8 3.70E-2 Torr
000.00:00:15 0105.8 3.70E-2 Torr
000.00:00:20 0105.8 3.70E-2 Torr
000.00:00:25 0105.8 3.70E-2 Torr
000.00:00:30 0105.8 3.70E-2 Torr
000.00:00:35 0105.8 3.70E-2 Torr
End