VACUUBRAND DCP 3000 User Manual
Page 36
To switch off automatic sending select ”off” or stop via serial interface.
Send recorded data. See section “Notes concerning the data logger
function (recording and sending of data)”, pg. 44.
+
Sensors: Selection of the pressure transducer to be controlled.
Maximum number of pressure transducers of the same type (VSK
3000 or VSP 3000 or VSK 3000 configured as reference) connected
to one DCP 3000: four.
You may replace up to four VSP 3000 pressure transducers by MPT 100
pressure transducers.
+
Display: Selection of the device parameters ”Brightness” between 0
- 100%; ”Contrast” between 0 - 100%; ”Sound” ”On” or ”Off”; ”Units”
”mbar”, ”hPa” or ”Torr”; ”Language” ”German”, ”English”, ”French”,
”Italian”, ”Spanish”, ”Turkish”, ”Korean”, ”Chinese”, ”Portuguese”,
”Russian”, ”Polish”, ”Dutch”, ”Japanese”, ”Finnish”.
+
Setpoint: Maximum four “On” setpoints and four ”Off” setpoints can
be preset after appropriate configuration of valves and / or digital I/O
interfaces (see section “Setpoints”, pg. 41).
+
Log data: Recording and internal storage of time and pressure data
of up to 4 pressure transducers (Log Data ”Off” or interval 1 . . . 3600
seconds)
The screen-shot shows the factory-set values.
Configuration
Adjustment 760 Torr
RS-232 . . .
Sensors . . .
Display . . .
Setpoint . . .
Log Data Off
- - - - - - - Graphic - - - - - - -
- - - - - - - - Back - - - - - - - -